Oumefar 0-10V Digital to Analog Module PLC to Voltage Converter PWM Converter PWM to Voltage Module for Industrial Control Panel PLC

Specification: Features: PWM converts digital into analog (0 to 10V). Input digital can be 5V or 24V 0- PWM . Output analog can be 0-10V voltage. Can be used for industrial control panel PLC or other interface switching. This module is easy to wire and convenient to use. Specification: Condition: brand new and Current: . 12mA Power supply input voltage: 12-30V Size: Approx. 5 x 4.5cm / 1.97 x 1.77inch Weight: 20g Quantity: 1pc Using : PWM input frequency range: 1KHZ-3KHZ PWM input range: 4.5V to 10V to , jumper inserted at 5V. This type mainly for conventional industrial control card (such as for board), for 5V the CPU interface. 12 to 24V to , jumper inserted at 24V. This type mainly for conventional PLC interface 0-10V analog voltage output explanation: When the input port is not connected, the output port gives 0V. The first time when this module, we better calibrate it: find a 50% duty ratio , connect to DIN-, DIN+, the amplitude matches corresponding jumper. When frequency is at 1kHz ~ 3kHz, use a multi-meter to test AO, GND. The meter should be showing around 5.4V. We adjust the potentiometer on the converter module to make multi-meter shows about 5.4V. After this is done, we have calibrated and matched pulse with this converter module. The module has a definition of 0.1V. Output current 10mA. If duty ratio is in opposite to voltage, we can select PWM output pin STEP LOW / ACTIVE for software. Package Included: 1 x PWM to Voltage Converter Note: After power-up, when there is no input , the output is 0V. There is output only when there is input.